GMO Micro Hole Deburring Tool

Overview

What is GMO?

The GMO tool was developed for simple and reliable deburring of the inner edges of drilled holes. It is possible to deburr just the inner edge or both edges in a single step. Burrs from intersecting holes can also be easily removed. The method is protected by German patent number 103 57 404.

• Adjustable hole diameter range from 0.8 mm to 7.5 mm
• Very fast deburring process — ideal for series production
• Easy blade replacement — low cost with replaceable consumables
• Robust and slim design — works on any machine

Components

GMO System Components

The GMO system consists of four main components: holder, insert, blade and spring. Each component is selected based on the application.

1 — Holders

Holder Types

3 different holder types are available:

• Standard — general-purpose use
• Standard (with clamping surface) — more secure clamping
• XL — for use with stronger springs

2 — Inserts

Insert Selection Table

The insert is mounted on the holder. It has an alignment channel for blade placement. As hole diameter increases, the channel moves further from the center axis.

3 — Blades

Blade Types and Selection

Blades are replaceable consumables. Durability depends on the material being machined (approximately 5,000 parts in average hardness steel). Three different forms are available:

• Normal form — single-edge sharp, inner edge deburring only
• Special form /B — double-edge sharp, inner and outer edge deburring
• Special form /25 — for cross-drilled holes into narrow bores

Application-specific blade forms can also be manufactured on request.

4 — Springs

Spring Selection Table

8 different spring types are available: 4 for standard holders, 4 for XL holders. Correct spring selection is critical for deburring success.

Videos

GMO Application Videos

Documents

Downloads

Related Products

See Also